Second Harvest

Having seen that there was a little honey that we could take without leaving the bees short we set about it on 16th, taking off 11 frames. Thanks to Hamish for the loan of the extractor once again. He has upgraded it by adding a piece of precision bright red engineering, an electric motor. Under the heading "Pros & Cons" I can report that its much quicker to use but on the other hand one has to be careful with the throttle if one wants it to remain in the same room. I suspect that at full belt it can cause electrons to collide. J managed to extract 30grammes of wax from the cappings to go with our 6 jars of honey.
During our first winter here I tried my hand at hedgelaying and it wasn't bad until Billy the Bull had fun pulling it to bits. I made the mistake of asking Malcolm what was the name of his bull. He looked at me as only a farmer can look at a townie and said that his animals have numbers, not names. If I want to know what it is I must read his eartag. Hence I named him Billy. The pic shows him resting earlier today.

Harvest time

Its in the jar, all 48 of them. Thank goodness I was warned of the importance of preparation to avoid terminal stickiness during the bottling process. All went well though I could have done with 3 hands whilst juggling different sieves. The honey in the extractor was divided into two equal tubs. The first was put in jars without further processing apart from filtering. The second batch allowed to start to set/crystalise for a week before it was warmed gently in my home made warming chest for 24 hours at 39c. Then it was put through a muslin filter and bottled. Good honey gradually crystalises and can set very hard which is inconvenient when trying to spread it on rushed morning toast. If it is allowed to set and is then gently warmed back to clear state it will take longer to set a second time and will set more softly. The downside is that heating will start to reduce flavour so we are trying to balance taste with texture.
Honey must never be overheated as the sugars caramelise and flavour is ruined. My warming chest has two 40w bulbs in the bottom. Testing showed that it will reach a safe maximum of 40c with the lid and both bulbs on.
Meanwhile our kitchen resembles a witches covern as cauldrons of chutney, jelly, jam, and marmalade bubble gently and the oven is full of a mongrel assortment of jars and bottles being sterilised ready for filling.
It sounds corny but it is truly satisfying to see the harvest being preserved ready for the coming winter and spring seasons.

Sticky stuff

Excellent hive meeting at Ashford Carbonell last weekend gave me a chance to chat with the "Experienced Ones" and I came away determined to take off our honey crop without further delay. Hamish most generously offered the loan of his extractor. Mother Nature heard me coming so wet and windy days followed but thankfully temperatures held up and I had the chance to remove 21 frames of honey on Thursday. Decapping proved less difficult than I had expected thanks to a large old serrated bread knife. Temp in the shed was 22.4 degrees. With the first 9 frames loaded into the extractor I tentatively wound the wheel and in no time there was the satisfying splatter of honey being hurled out of the cells against the side. At last after 14 months our first HONEY. It is important to load the machine evenly otherwise it will vibrate its way out of the room so I did 2 further loads of 6 frames each. The honey was left overnight but the empty "wet" frames were loaded back into the supers and returned to the hives for the bees to clean up. Next morning the honey was run out of the extractor through a coarse filter into two plastic buckets. Each was weighed at 10 kilos giving a total harvest of 20 kilos or 44 lbs. I also filled our very first one pound jar which will be our test sample for establishing the crystalisation properties of our honey.

If only we get some more warm weather during the next couple of weeks there may be some more honey to harvest. The warm sun today after rain seems to have encouraged the clover into a nectar flow, it was covered in all sorts of bees this afternoon.

New friends

Telephone call asking if I would like a "nuc" [nucleus colony]from Tom results in a delightful drive in Hamish's van [thanks Hamish] up the beautiful Corvedale lanes last evening. Tom has been a beekeeper for over 50 years, he is "cutting back" and only has about 40 hives now! He understands every tic of nature's clock. Whilst we wait for the flying bees to return to the nuc we chat in the evening sunshine. A priceless opportunity to tap into the wisdom of so many years of experience. He used to think nothing of taking 20 hives in his Morris Minor Traveller up to some remote field to harvest honey from a particular crop. Its one of those occasions when I wish I had a digital recorder.

In no time half an hour passes, sun below the hilltops and most of the flying bees back so reluctantly we load up and head home.

First thing this morning I let the bees out to fly. Then mid, very warm, afternoon I take brood box number 3 down to the hive stand. The nuc is moved to one side, opened, and the frames carefully lifted in the same order into the brood box that is placed where the nuc had been. This should ensure that flying bees return to the right home. The remaining bees are shaken into the box and the nuc removed. Then a feeder is placed ontop and filled with syrup by way of a "welcome" feed.

Its a bit late in the season to take on a new colony. They will not produce honey for us this year but if the weather is kind there is a good chance that they can be built up sufficiently to survive the coming winter and set up a good start to next seasons crop. The pics show before during and after the transfer from nuc to brood box.

Civil War avoided

We live in an area where history is dominated by the English Civil War and bees follow in that tradition. If you simply add one colony on top of another they will set about killing each other. If, on the other hand, you spread one sheet of good newsprint over the host colony before adding the new one above things are different. The bees will within 48 hours, chew their way through and, like Channel Tunnellers, greet each other on the other side with open wings and no conflict. Incidentally I wonder if the newspaper pubishers appreciate the consequences to our honey bees when they trim their page sizes.

Inspection 8 days ago revealed that hive 2 was still queenless after more than 4 weeks. Not having a spare queen or young brood to introduce I decided to unite it with hive 3 where there is a laying queen. the newspaper method worked a treat and yesterday's inspection revealed lots of contented bees and chewed newspaper. So now we are back down to 2 colonies, lets hope this beautiful weather gives them a boost.

Incidentally the "extension" underneath hive 1 was successfully dealt with by placing a tray underneath and gently brushing the bees off with a feather. They were then poured into the top of the hive. The unwanted comb was then scraped off and collected for melting down.

Bees build extension

I wish our bees would read the same text books as me. I came home this evening from an excellent open day organised by Ludlow & District Beekeepers at Mocktree and decided to have an evening look at the hives. Hearing some extra buzzing from Hive 1 I bent down and there they were, a cluster of bees who haven't learned that they are supposed to build comb IN the hive rather than under it! No need to count sheep tonight, I shall be wondering what on earth I'm going to do about these hooligans.

In the garage we have some cardboard boxes stored on a shelf. Hearing buzzing I looked in the handhold and there was a wasps nest. Another issue I shall have to deal with. Who said insects are boring!!

latest inspection

Sunny day last Saturday so after attending a coffee morning at Kinton Farm I checked the hives. Number 1 has made good progress filling the second super, the first is well filled with honey much of which is capped so we shall at least have some honey this season. Did not look into this brood because new queen will only just have started laying new brood and I don't want to disturb. I have read that disruption too early can cause the workers to "ball" and thereby kill the queen. Lots of pollen being taken in and lots of bees so I am hopeful for this colony.
Hive 2 has no brood or eggs at all so it is queenless. This will be fatal for the colony unless I take action because the old workers will simply die out without being replaced. I have to decide whether a] to let them continue to add honey until they die out, or b]to merge them with another stronger colony where they can add to the honey harvest, or c] introduce a frame of new brood in the hope that they will raise a new queen.
Hive 3 has been adding to the honey in the supers. A quick look at one of the brood frames in the bottom box revealed uncapped larvae. This means I have a new laying queen in this hive. I now wait to see if she is productive enough to build up a strong colony for the winter.
Hope the young woodpecker pictured on Sunday watching mum on our feeder doesn't learn how to get at honey in the hive this winter. They can do terrible damage so I shall have to surround the hives with wire netting as a precaution.